1 - write your name on back of canvas

2 - play with your robot to try it out

3 - Put canvas in a corral

4 - Be sure at least one of the front feet are touching the surface

5 - Dab that robot foot in a paint color

6 - set robot free on the canvas

7 - PLEASE close each pot of paint before changing colors

8 - After you’re done painting, add Maker Faire Orlando 2023 tag with modge podge at the bottom - Use the cardboard template for position help

9 - Host will dry canvas for taking home

1 - toothbrush head
2 - 3 pieces of double-sided tape
3 - phone vibration motor
4 - 2 rubber bands
5 - 1.5 volt battery
6 - 2 glow-in-the-dark eyes
7 - toothpick
8 - 2 pipe cleaners

To Turn ON -
Place wire on top of battery (-)
under the rubber band
To Turn OFF -
Pull out wire from top of battery

Use toothpick to pry rubber band
Leave the side wire alone (+)
BUT sometimes they need a wiggle

Bend a leg to change motion

Just a LITTLE paint on foot often
is better then a LOT at once

Start painting from different locations on canvas

PARTS

1. brush head
2. 2-sided tape
3. 1.5 volt motor & battery (+/- 2 hours)
4. 2 pipe cleaners
5. gold foil on gaff tape for power switch
6. 2 googly eyes
7. extra 2-sided tape
8. puff ball

1,2,3,4,6 are included with standard kit

IMPROVEMENTS

1. brush direction/face is movement orientated
2. centered on top of body
3. motor wires freed from legs
4. wrapped above & below body - feet are curved to avoid wire frame getting stuck & better paintbrush surface
5. both battery poles accessable - gold foil makes better connections & on/off switch has easy to use tab
6. eyes on motor unhinders battery replacement
7. eyes & motor reinforced with 2-sided tape
8. trimmed matching hair on head